Publications emanating from or including TG1 work
 
Conferences and Scientific Journals

 

  • P.J. Bouchard, J.R. Santisteban, L. Edwards, M. Turski, J. James, S. Pratihar and P.J. Withers, “Residual Stress Measurements Revealing Weld Bead Start and Stop Effects in Single and Multi-Pass Weld-Runs”, in: Proceedings of the ASME Pressure Vessels and Piping Conference 2005 – Volume 6: Materials and Fabrication, Denver, USA, July 17-21, 2005, ASME, New York, 2005, ISBN 0-7918-4191-X, pp. 853-865

  • M. Turski, S. Pratihar, L. Edwards, M.R. Daymond and M.E. Fitzpatrick, “The Effect of Plastic Anisotropy on the Residual Stresses within a 316L Stainless Steel Bead-on-Plate Specimen”, Materials Science Forum, Vol. 524-525, 2006, pp. 679-6844

  • P.J. Bouchard, P.J. Withers, “Identification of Residual Stress Length Scales in Welds for Fracture Assessment”, in: “Residual Stress and Its Effects on Fatigue and Fracture”, Proceedings of a Special Symposium held within the 16th European Conference of Fracture – ECF16, Alexandroupolis, Greece 3-7 July, 2006, Springer, Dordrecht, 2006, ISBN 978-1-4020-5328-3, pp. 163-176

and in: Proceedings of 16th European Conference on Fracture, Alexandropoulis, Greece, July 3-7, 2006, Fracture of Nano and Engineering Materials and Structures, E.E. Gdoutos (ed.), CD Publication and Book of abstracts, Springer, Dordrecht, 2006, ISBN-10 1-4020-4971-4, pp. 1327-1328

  • S.K. Bate, R. Charles, D. Everett, D. O’Gara, A. Warren and S. Yellowlees, “Sensitivity of Predicted Residual Stresses to Modelling Assumptions”, in: “Residual Stress and Its Effects on Fatigue and Fracture”, Proceedings of a Special Symposium held within the 16th European Conference of Fracture – ECF16, Alexandroupolis, Greece 3-7 July, 2006, Springer, Dordrecht, 2006, ISBN 978-1-4020-5328-3, pp. 105-115

and in: Proceedings of 16th European Conference on Fracture, Alexandropoulis, Greece, July 3-7, 2006, Fracture of Nano and Engineering Materials and Structures, E.E. Gdoutos (ed.), CD Publication and Book of abstracts, Springer, Dordrecht, 2006, ISBN-10 1-4020-4971-4, pp. 1331-1332

  • S.K. Bate and C. Watson, “New UK Research Programme on Residual Stresses”, in: Proceedings of ASME PVP 2006 / ICPVT-11, Vancouver, CAN, July 23-27, 2006, ASME, CD Publication, 2006, Order No. I749CD, ISBN 0-7918-3782-3

and in: Proceedings of the ASME Pressure Vessels and Piping Conference 2006 – Volume 6: Materials and Fabrication, Vancouver, CAN, July 23-27, 2006, ASME, New York, 2007, ISBN 0-7918-4757-8, pp. 195-201

  • P.J. Bouchard, L. Edwards, A.G. Youtsos and R. Dennis, “Development of a Residual Stress Simulation Benchmark for a Single Bead-on-Plate Weldment”, in: Proceedings of ASME PVP 2006 / ICPVT-11, Vancouver, CAN, July 23-27, 2006, ASME, CD Publication, 2006, Order No. I749CD, ISBN 0-7918-3782-3

and in: Proceedings of the ASME Pressure Vessels and Piping Conference 2006 – Volume 6: Materials and Fabrication, Vancouver, CAN, July 23-27, 2006, ASME, New York, 2007, ISBN 0-7918-4757-8, pp. 893-900

  • R.J. Dennis, N.A. Leggatt, A. Gregg, “Optimization of Weld Modelling Techniques – Bead-on-Plate Analysis”, in: Proceedings of ASME PVP 2006 / ICPVT-11, Vancouver, CAN, July 23-27, 2006, ASME, CD Publication, 2006, Order No. I749CD, ISBN 0-7918-3782-3

and in: Proceedings of the ASME Pressure Vessels and Piping Conference 2006 – Volume 6: Materials and Fabrication, Vancouver, CAN, July 23-27, 2006, ASME, New York, 2007, ISBN 0-7918-4757-8, pp. 967-978

  • P.J. Withers, M. Turski, L. Edwards, P.J. Bouchard and D.J. Buttle, “Recent advances in residual stress measurement”, International Journal of Pressure Vessels and Piping, Vol. 85, 2008, pp. 118-127

  • C. Ohms, R.V. Martins, O. Uca, A.G. Youtsos, P.J. Bouchard, M. Smith, M. Keavey, S.K. Bate, P. Gilles, R.C. Wimpory, L. Edwards, “The European Network on Neutron Techniques Standardization for Structural Integrity – NeT”, in: Proceedings of ASME PVP 2008, Chicago, USA, July 27-31, 2008, ASME, CD Publication, 2008, Order No. I795CD, ISBN 0-7918-3828-5

  • M. Smith, A.C. Smith, R.C. Wimpory, C. Ohms, B. Nadri, P.J. Bouchard, “Optimising Residual Stress Measurements and Predictions in a Welded Benchmark Specimen: a Review of Phase Two of the NeT Task Group 1 Single Bead on Plate Round Robin”, in: Proceedings of ASME PVP 2009, Prague, Chech Republic, July 26-30, 2009, ASME, CD Publication, 2009, Order No. I821CD, ISBN 978-0-7918-3854-9

  • M.C. Smith, B. Nadri, A.C. Smith, P.J. Bendeich, D.G. Carr, L.E. Edwards, “Optimisation of Mixed Hardening Material Constitutive Models for Weld Residual Stress Simulation Using the Net Task Group 1 Single Bead on Plate Benchmark Problem”, in: Proceedings of ASME PVP 2009, Prague, Chech Republic, July 26-30, 2009, ASME, CD Publication, 2009, Order No. I821CD, ISBN 978-0-7918-3854-9

  • P.J. Bendeich, M.C. Smith, D.G. Carr, L.E. Edwards, “Sensitivity of Predicted Weld Residual Stresses in the NeT Task Group 1 Single Bead on Plate Benchmark Problem to Finite Element Mesh Design and Heat Source Characteristics”, in: Proceedings of ASME PVP 2009, Prague, Chech Republic, July 26-30, 2009, ASME, CD Publication, 2009, Order No. I821CD, ISBN 978-0-7918-3854-9

  • C. Ohms, R.C. Wimpory, D. Neov, “Residual Stress Measurement by Neutron Diffraction in a Single Bead on Plate Weld – Influence of Instrument and Measurement Settings on the Scatter of the Results”, Materials Science Forum, Vol. 638-642, 2010, pp. 2452-2457

  • K. Decroos, C. Ohms, Y. Houbaert, “Including Elastical Anisotropy due to Texture in a Finite Element Model for the Prediction of Residual Stresses in Welds”, in: Materials Processing and Texture, Proceedings of the 15th International Conference on the Textures of Materials (ICOTOM 15), Pittsburgh, USA, June 1-6, 2008, A.D. Rollett (ed.), Ceramic Transactions, 200, John Wiley & Sons, Inc, Hoboken, NJ, USA, 2009, ISBN 978-0-470-40834-6, pp. 115-122

  • J. Xu, P. Gilles, “Numerical Simulation of a Single Bead on Plate and Three Pass Slot Welds in Austenitic Stainless Steel”, Proceedings of ASME 2011 Pressure Vessels and Piping Conference, Volume 6: Materials and Fabrication, Parts A and B, Baltimore, Maryland, USA, July 17-21, 2011, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-4456-4, Copyright © 2011 by ASME, DOI: 10.1115/PVP2011-57242

  • K. Decroos, M. Seefeldt, C. Ohms, R. Petrov, F. Verhaeghe, L. Kestens, “Modelling and Characterisation of the Texture Development in the Fusion Zone of an Austenitic Weld”, Steel Research International, Vol. 82, Issue 8, 2011, pp. 911-917, DOI: 10.1002/srin.201000297

  • K. Decroos, M. Seefeldt, C. Ohms, R. Petrov, F. Verhaeghe, L. Kestens, “Calculation of macroscopic elasto-plastic anisotropy based on an analytical expression of the Orientation Distribution Function in the case of fibre textures”, Computational Materials Science, Vol. 68, 2013, pp. 263-270, DOI: 10.1016/j.commatsci.2012.10.024

  • K. Decroos, C. Ohms, R. Petrov, M. Seefeldt, F. Verhaeghe, L. Kestens, “Automatic meshing method for optimization of the fusion zone dimensions in Finite Element models of welds”, Materials Science Forum, Vol. 768-769, 2014, pp. 597-604, DOI:10.4028/www.scientific.net/MSF.768-769.597

  • D.J. Dewees, P.E. Prueter, S.R. Kummari, “Technical Basis for the Proposed Weld Residual Stress Guidance in API 579-1/ASME FFS-1”, Proceedings of ASME 2014 Pressure Vessels and Piping Conference, Anaheim, California, USA, July 20-24, 2014, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-4598-1, Copyright © 2014 by ASME, DOI: 10.1115/PVP2014-28839

  • M.C. Smith, A.C. Smith, R. Wimpory, C. Ohms, “A review of the NeT Task Group 1 residual stress measurement and analysis round robin on a single weld bead-on-plate specimen”, International Journal of Pressure Vessels and Piping, Vol. 120–121, Aug–Sep 2014, pp. 93-140, DOI:10.1016/j.ijpvp.2014.05.002

  • S.A. Alexandratos, L. Shi, N.P. O’Dowd, “Parameter Study of a Thermal Analysis of a Bead-on-Plate Weld”, Proceedings of ASME 2018 Pressure Vessels and Piping Conference, Prague, Czech Republic, July 15-20, 2018, Conference Sponsors: Pressure Vessels and Piping Division, ISBN:, Copyright © 2018 by ASME, DOI: / PVP2018-84999

 

(Contributions to) Monographs/Reports

 

  • M.C. Smith and A.C. Smith, “NeT Task Group 1 Single Bead Weld on Plate: Review of Phase 1 Weld Simulation Round Robin”, British Energy Generation Ltd Report E/REP/BDBB/0089/GEN/05, 2006

  • C. Ohms, R.C. Wimpory, D. Neov, A.G. Youtsos, “Residual stress analysis by means of neutron diffraction at research reactors – facilities and applications at the HFR”, in: IAEA-TECDOC-1545: “Characterization and Testing of Materials for Nuclear Reactors, Proceedings of a technical meeting held in Vienna, May 29-June 2, 2006”, International Atomic Energy Agency, Vienna, March 2007, ISBN 92-0-103007-X, ISSN 1011-4289, pp. 69-85

 

PhD Thesis

 

  • K. Decroos, “The Influence of Anisotropy due to Crystallographic Texture on Residual Stresses in Welds”, PhD Thesis, University of Ghent, Belgium, 2011, ISBN 978-90-8578-442-5

 
Special Issue of IJPVP

 

  • C.E. Truman, M. Smith, Editorial, “The NeT residual stress measurement and modelling round robin on a single weld bead-on-plate specimen”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 1-2

  • P. Gilles, W. El-Ahmar and J.-F. Jullien, “Robustness analyses of numerical simulation of fusion welding NeT-TG1 application: ‘Single weld-bead-on-plate’”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 3-12

  • S. Pratihar, M. Turski, L. Edwards, P.J. Bouchard, “Neutron diffraction residual stress measurements in a 316L stainless steel bead-on-plate weld specimen”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 13-19

  • X. Ficquet, D.J. Smith, C.E. Truman, E.J. Kingston and R.J. Dennis, “Measurement and prediction of residual stress in a bead-on-plate weld benchmark specimen”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 20-30

  • P.J. Bouchard, “The NeT bead-on-plate benchmark for weld residual stress simulation”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 31-42

  • R.M. Molak, K. Paradowski, T. Brynk, L. Ciupinski, Z. Pakiela, K.J. Kurzydlowski, “Measurement of mechanical properties in a 316L stainless steel welded joint”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 43-47

  • R.C. Wimpory, C. Ohms, M. Hofmann, R. Schneider, A. G. Youtsos, “Statistical Analysis of Residual Stress Determinations using Neutron Diffraction”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 48-62

  • C. Ohms, R.C. Wimpory, D.E. Katsareas, A.G. Youtsos, “NET TG1: Residual Stress Assessment by Neutron Diffraction and Finite Element Modeling on a Single Bead Weld on a Steel Plate”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 63-72

  • S.K. Bate, R. Charles and A. Warren, “Finite element analysis of a single bead-on-plate specimen using SYSWELD”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 73-78

  • M.C. Smith, A.C. Smith, “NeT bead-on-plate round robin: Comparison of residual stress predictions and measurements”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 79-95

  • M.C. Smith, A.C. Smith, “NeT bead-on-plate round robin: Comparison of transient thermal predictions and measurements”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 96-109

  • X. Shan, C.M. Davies, T. Wangsdan, N.P. O’Dowd, K.M. Nikbin, “Thermo-mechanical modelling of a single-bead-on-plate weld using the finite element method”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 110-121

  • M. Hofmann, R.C. Wimpory, “NET TG1: Residual stress analysis on a single bead weld on a steel plate using neutron diffraction at the new engineering instrument ‘STRESS-SPEC’”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 122-125

  • M. Turski, L. Edwards, “Residual stress measurement of a 316l stainless steel bead-on-plate specimen utilising the contour method”, International Journal of Pressure Vessels and Piping, Vol. 86, No. 1, 2009, pp. 126-131

 

Publications emanating from or including TG2 work
 
Conferences and Scientific Journals

 

  • L.K. Keppas, N.K. Anifantis, D.E. Katsareas, A.G. Youtsos, “Residual Stress Prediction in Letterbox-type Repair Welds”, Proceedings of a Special Symposium held within the 16th European Conference of Fracture – ECF16, Alexandroupolis, Greece 3-7 July, 2006, Springer, Dordrecht, 2006, ISBN 978-1-4020-5328-3, pp. 27-39

and in: Proceedings of 16th European Conference on Fracture, Alexandropoulis, Greece, July 3-7, 2006, Fracture of Nano and Engineering Materials and Structures, E.E. Gdoutos (ed.), CD Publication and Book of abstracts, Springer, Dordrecht, 2006, ISBN-10 1-4020-4971-4, pp. 1313-1314

  • C. Ohms, R.C. Wimpory, D. Neov, A.G. Youtsos, “Evaluation of Novel Post Weld Heat Treatment in Ferritic Steel Repair Welds based on Neutron Diffraction”, in: “Residual Stress and Its Effects on Fatigue and Fracture”, Proceedings of a Special Symposium held within the 16th European Conference of Fracture – ECF16, Alexandroupolis, Greece 3-7 July, 2006, Springer, Dordrecht, 2006, ISBN 978-1-4020-5328-3, pp. 55-66

and in: Proceedings of 16th European Conference on Fracture, Alexandropoulis, Greece, July 3-7, 2006, Fracture of Nano and Engineering Materials and Structures, E.E. Gdoutos (ed.), CD Publication and Book of abstracts, Springer, Dordrecht, 2006, ISBN-10 1-4020-4971-4, pp. 1307-1308

  • M. Hofmann, G.A. Seidl, J. Rebelo-Kornmeier, U. Garbe, R. Schneider, R.C. Wimpory, U. Wasmuth, U. Noster, “The New Materials Science Diffractometer STRESS-SPEC at FRM-II”, Materials Science Forum Vols. 524-525 (2006) pp 211-216

  • L.K. Keppas, D.E. Katsareas, R.C. Wimpory, N.K. Anifantis, A,G. Youtsos, “Letterbox Type Repair Weld Finite Element Simulation and Residual Stress Prediction”, Materials Science Forum Vols. 524-525 (2006) pp 445-450

  • C. Ohms, R.C. Wimpory, D. Neov, M. Hofmann, M. Turski, R. Haigh, M. Fitzpatrick, L. Edwards, “Residual Stress Measurements in a Three-Bead Slot Weld in a 20 mm Carbon Steel Plate”, in: Proceedings of ASME PVP 2009, Prague, Chech Republic, July 26-30, 2009, ASME, CD Publication, 2009, Order No. I821CD, ISBN 978-0-7918-3854-9

  • L.K. Keppas, R.C. Wimpory, D.E. Katsareas, N.K. Anifantis, A.G. Youtsos, “Evaluation of residual stress assessment methods using a repair weld benchmark”, Journal of Strain Analysis, Vol. 45, 2010, pp. 197-208

  • L.K. Keppas, R.C. Wimpory, D.E. Katsareas, C. Ohms, “Combination of Simulation and Experiment in Designing Repair Weld Strategies: a Feasibility Study”, Nuclear Engineering & Design, Vol. 240 (10), 2010, pp. 2897-2906

 

Publications emanating from or including TG4 work
Conferences and Scientific Journals

 

  • R.V. Martins, C. Ohms, K. Decroos, “Full Depth-Resolved Strain Mapping of a Three-Pass Slot Weld Specimen in Austenitic Stainless Steel Using the Spiral Slit Technique”, Materials Science Forum, Vol. 652, 2010, pp. 74-79

  • R.V. Martins, C. Ohms, K. Decroos, “Full 3D Spatially Resolved Mapping of Residual Strain in a 316L Austenitic Stainless Steel Weld Specimen”, Materials Science and Engineering A, Vol. 527, 2010, pp. 4779–4787, doi: 10.1016/j.msea.2010.03.110

  • O. Muránsky, P.J. Bendeich, M.C. Smith, O. Kirstein, L. Edwards, T.M. Holden, “Analysis of Residual Stresses in Three-Pass Slot Weld (NeT-TG4): Finite Element Modelling & Neutron Diffraction”, in: Proceedings of ASME PVP 2010, Bellevue, WA, USA, July 18-22, 2010, ASME, CD Publication, 2010, Order No., ISBN –

  • J. Xu, P. Gilles, “Numerical Simulation of a Single Bead on Plate and Three Pass Slot Welds in Austenitic Stainless Steel”, Proceedings of ASME 2011 Pressure Vessels and Piping Conference, Volume 6: Materials and Fabrication, Parts A and B, Baltimore, Maryland, USA, July 17-21, 2011, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-4456-4, Copyright © 2011 by ASME, DOI: 10.1115/PVP2011-57242

  • E.A. Flores-Johnson, O. Muránsky, C.J. Hamelin, P.J. Bendeich, L. Edwards, “Effect of residual-stress field on the ballistic performance of welded steel plate”, Proceedings of the 9th International Conference on Shock & Impact Loads on Structures, 16-18 November 2011, Fukuoka, Japan, Y. Sonoda, T.S. Lok (eds.), CI Premier Limited, 2011, ISBN 978-981089529-7, pp. 307-312

  • M.C. Smith, O. Muránsky, C. Austin, P.J. Bendeich, L. Edwards, “Optimised Modelling of Weld Metal Constitutive Behaviour in the NeT TG4 International Weld Simulation and Measurement Benchmark”, in: Proceedings of ASME PVP 2012, Toronto, CAN, July 15-19, 2012, ASME, CD Publication, 2012, Order No., ISBN –

  • O. Muránsky, C.J. Hamelin, M.C. Smith, P.J. Bendeich, L. Edwards, “The effect of plasticity theory on predicted residual stress fields in numerical weld analyses”, Computational Materials Science, Vol. 54, 2012, pp. 125-134, DOI:10.1016/j.commatsci.2011.10.026

  • O. Muránsky, M.C. Smith, P.J. Bendeich, T.M. Holden, V. Luzin, R.V. Martins, L. Edwards, “Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements”, International Journal of Solids and Structures, Vol. 49, 2012, pp. 1045-1062, DOI:10.1016/j.ijsolstr.2011.07.006

  • E.A. Flores-Johnson, O. Muránsky, C.J. Hamelin, P.J. Bendeich, L. Edwards, “Numerical analysis of the effect of weld-induced residual stress and plastic damage on the ballistic performance of welded steel plate”, Computational Materials Science, Volume 58, June 2012, pp. 131-139, DOI:10.1016/j.commatsci.2012.02.009

  • F. Valiorgue, A. Brosse, V. Robin, P. Gilles, J. Rech, J.M. Bergheau, “Chained Welding and Finish Turning Simulations of Austenitic Stainless Steel Components”, Proceedings of ASME 2013 Pressure Vessels and Piping Conference, Volume 6A: Materials and Fabrication, Paris, France, July 14-18, 2013, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-5570-6, Copyright © 2013 by ASME, DOI: 10.1115/PVP2013-97980

  • O. Muránsky, C.J. Hamelin, M.C. Smith, P.J. Bendeich, L. Edwards, "The Role of Plasticity Theory on the Predicted Residual Stress Field of Weld Structures", Materials Science Forum, Vol. 772, 2014, pp. 65-71, DOI: 10.4028/www.scientific.net/MSF.772.65

  • D.J. Dewees, P.E. Prueter, S.R. Kummari, “Technical Basis for the Proposed Weld Residual Stress Guidance in API 579-1/ASME FFS-1”, Proceedings of ASME 2014 Pressure Vessels and Piping Conference, Anaheim, California, USA, July 20-24, 2014, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-4598-1, Copyright © 2014 by ASME, DOI: 10.1115/PVP2014-28839

  • M.C. Smith, A. Smith, R.C. Wimpory, C. Ohms, “A review of the NeT TG4 international weld residual stress benchmark”, Proceedings of ASME 2015 Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, Boston, Massachusetts, USA, July 19-23, 2015, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-5700-7, Copyright © 2015 by ASME, DOI: 10.1115/PVP2015-45801

  • O. Muránsky, C.J. Hamelin, V.I. Patel, V. Luzin, C. Braham, “The influence of constitutive material models on accumulated plastic strain in finite element weld analyses”, International Journal of Solids and Structures, Volumes 69–70, Sep 2015, pp. 518-530, DOI:10.1016/j.ijsolstr.2015.04.032

  • F. Hosseinzadeh, Y. Traore, P.J. Bouchard, O. Muránsky, “Mitigating cutting-induced plasticity in the contour method, part 1: Experimental”, International Journal of Solids and Structures, Volumes 94–95, Sep 2016, pp. 247-253, DOI:10.1016/j.ijsolstr.2015.12.034

  • O. Muránsky, C.J. Hamelin, F. Hosseinzadeh, M.B. Prime, “Mitigating cutting-induced plasticity in the contour method. Part 2: Numerical analysis”, International Journal of Solids and Structures, Volumes 94–95, Sep 2016, pp. 254-262, DOI:10.1016/j.ijsolstr.2015.12.033

  • R.C. Wimpory, M. Hofmann, J. Rebelo-Kornmeier, M. Boin, C. Ohms, “Minimizing and Characterizing Uncertainties in Neutron Strain Measurements with Special Attention to Grain Size Effects”, Materials Science Forum, Volume 905, 2017, pp. 143-150, DOI: 10.4028/www.scientific.net/MSF.905.143

  • O. Muránsky, C.J. Hamelin, M. Tran, C. Braham, M.C. Smith, “Assessment of Welding-Induced Plasticity in Austenitic Steel Weldments”, Proceedings of ASME 2016 Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, Vancouver, British Columbia, CAN, July 17-21, 2016, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-5043-5, Copyright © 2016 by ASME, DOI: 10.1115/PVP2016-63358

 

Special Issue of IJPVP

 

  • “Editorial: Special issue on the NeT Task Group 4 residual stress measurement and analysis round robin on a three-pass slot-welded plate specimen”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 1-2, DOI: 10.1016/j.ijpvp.2018.01.002

  • M.C. Smith, A.C. Smith, C. Ohms, R.C. Wimpory, “The NeT Task Group 4 residual stress measurement and analysis round robin on a three-pass slot-welded plate specimens”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 3-21, DOI: 10.1016/j.ijpvp.2017.09.003

  • O. Muránsky, C.J. Hamelin, F. Hosseinzadeh, M.B. Prime, “Evaluation of a self-equilibrium cutting strategy for the contour method of residual stress measurement”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 22-31, DOI: 10.1016/j.ijpvp.2017.04.002

  • O. Muránsky, M. Tran, C.J. Hamelin, S.L. Shrestha, D. Bhattacharyya, “Assessment of welding-induced plasticity via electron backscatter diffraction”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 32-38, DOI: 10.1016/j.ijpvp.2017.04.001

  • L. Depradeux, R. Coquard, “Influence of viscoplasticity, hardening, and annealing effects during the welding of a three-pass slot weld (NET-TG4 round robin)”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 39-54, DOI: 10.1016/j.ijpvp.2017.04.005

  • O. Muránsky, F. Hosseinzadeh, C.J. Hamelin, Y. Traore, P.J. Bendeich, “Investigating optimal cutting configurations for the contour method of weld residual stress measurement”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 55-67, DOI: 10.1016/j.ijpvp.2017.04.006

  • K. Abburi Venkata, C.E. Truman, R.C. Wimpory, T. Pirling, “Numerical simulation of a three-pass TIG welding using finite element method with validation from measurements”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 68-79, DOI: 10.1016/j.ijpvp.2017.05.014

  • R.C. Wimpory, R.V. Martins, M. Hofmann, J. Rebelo-Kornmeier, S. Moturu, C. Ohms, “A complete reassessment of standard residual stress uncertainty analyses using neutron diffraction emphasizing the influence of grain size”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 80-92, DOI: 10.1016/j.ijpvp.2017.09.002

  • M.C. Smith, O. Muránsky, C. Austin, P.J. Bendeich, Q. Xiong, “Optimised modelling of AISI 316L(N) material behaviour in the NeT TG4 international weld simulation and measurement benchmark”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 93-108, DOI: 10.1016/j.ijpvp.2017.11.004

  • M.C. Smith, A.C. Smith, “Advances in weld residual stress prediction: A review of the NeT TG4 simulation round robin part 1, thermal analyses”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 109-129, DOI: 10.1016/j.ijpvp.2017.11.003

  • M.C. Smith, A.C. Smith, “Advances in weld residual stress prediction: A review of the NeT TG4 simulation round robins part 2, mechanical analyses”, International Journal of Pressure Vessels and Piping, Vol. 164, 2018, pp. 130-165, DOI: 10.1016/j.ijpvp.2018.03.007

 
Publications emanating from or including TG5 work
 
Conferences and Scientific Journals

 

  • R.V. Martins, J.A. Francis, “Residual Stress, Texture, and Phase Investigation of Autogenous Edge Welds Using High Energy Synchrotron Radiation”, Materials Science Forum, Vol. 681, 2011, pp. 43-48

  • C.J. Hamlin, O. Muránsky, V. Luzin, P.J. Bendeich, L. Edwards, “Accounting for Phase Transformations during Welding of Ferritic Steels”, Proceedings of ASME 2011 Pressure Vessels and Piping Conference, Volume 6: Materials and Fabrication, Parts A and B, Baltimore, Maryland, USA, July 17-21, 2011, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-4456-4, Copyright © 2011 by ASME, DOI: 10.1115/PVP2011-57426

  • C.J. Hamelin, O. Muránsky, P.J. Bendeich, K. Short, L. Edwards, “Predicting solid-state phase transformations during welding of ferritic steels”, Materials Science Forum, Vol. 706-709, 2012, ISBN: 978-303785303-0, pp. 1403-1408, DOI: 10.4028/www.scientific.net/MSF.706-709.1403

  • C.J. Hamelin, O. Muránsky, P.J. Bendeich, L. Edwards. “Predicting post-weld residual stresses in ferritic steel weldments”, Proceedings of ASME Pressure Vessels and Piping Division Conference, PVP 2012, Toronto, CAN, July 15-19, 2012, Vol. 6, Parts A and B, ISBN: 978-079185505-8, pp. 1061-1069, DOI: 10.1115/PVP2012-78073

  • R.J. Dennis, R. Kulka, O. Muransky, M.C. Smith, “Influence of Phase Transformations on Residual Stresses in Welded Structures”, Proceedings of ASME 2013 Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, Paris, France, July 14-18, 2013, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-5571-3, Copyright © 2013 by ASME, DOI: 10.1115/PVP2013-97684

  • M.C. Smith, S. Bate, P.J. Bouchard, “Simple Benchmark Problems for Finite Element Weld Residual Stress Simulation”, Proceedings of ASME 2013 Pressure Vessels and Piping Conference, Volume 6B: Materials and Fabrication, Paris, France, July 14-18, 2013, Conference Sponsors: Pressure Vessels and Piping Division, ISBN: 978-0-7918-5571-3, Copyright © 2013 by ASME, DOI: 10.1115/PVP2013-98033

  • M. Hofmann, W.M. Gan, J. Rebelo-Kornmeier, M. Schobel, “Materials science at the diffractometer STRESS-SPEC at FRM-II”, Neutron News, Vol. 24, 3, 2013, pp. 14-17, DOI: 10.1080/10448632.2013.804358

  • C.J. Hamelin, O. Muránsky, M.C. Smith, T.M. Holden, V. Luzin, P.J. Bendeich, L. Edwards, “Validation of a numerical model used to predict phase distribution and residual stress in ferritic steel weldments”, Acta Materialia, Vol. 75, 15, Aug 2014, pp. 1-19, DOI:10.1016/j.actamat.2014.04.045

  • C.J. Hamelin, O. Muránsky, L. Edwards, “The influence of austenite grain size during welding simulations of ferritic steels”, Advanced Materials Research, Vol. 996, ISBN: 978-303835153-5, 2014, pp. 512-517, DOI: 10.4028/www.scientific.net/AMR.996.512

 

Publications emanating from or including TG6 work
 
Conferences and Scientific Journals
 
  • M.C. Smith, O. Muránsky, V. Akrivosn, J. Angles, “The NeT Task Group 6 Weld Residual Stress Measurement and Simulation Round Robin in Alloy 600/82”, Proceedings of ASME 2016 Pressure Vessels and Piping Conference, Volume 6: Materials and Fabrication, Part B, Vancouver, BC, Canada, July 17-21, 2016, ASME Pressure Vessels and Piping Division, ISBN:  978-0-7918-5043-5, DOI: 10.1115/PVP2016-63941

 

Overview Publications on NeT

 

  • C. Ohms, R.V. Martins, O. Uca, A.G. Youtsos, P.J. Bouchard, M. Smith, M. Keavey, S.K. Bate, P. Gilles, R.C. Wimpory, L. Edwards, “The European Network on Neutron Techniques Standardization for Structural Integrity – NeT”, in: Proceedings of ASME PVP 2008, Chicago, USA, July 27-31, 2008, ASME, CD Publication, 2008, Order No. I795CD, ISBN 0-7918-3828-5

  • V. Deaconu, I. Ionita, T. Meleg, M. Deaconu, C. Truta and G. Oncioiu, "Eleven Years of NeT Network Research Activity - INR Contributions", Proceedings of Nuclear 2013 – The 6th Annual International Conference on Sustainable Development through Nuclear Research and Education, Part 3, May 22-24, 2013, Pitesti, Romania, ISSN 2066-2955, pp. 143-150

Network on Neutron Techniques Standarization for Structural Integrity